The types of clouds and cloud families
A cloud can be divided into three, namely:1. Columns clouds are clouds that gather and form essentially horizontal2. Stratus clouds are thin clouds covered the sky and the wide spread evenly3. Cirrus clouds are clouds that stand alone, smooth and fibrous, often there are ice crystals but did not cause rain
Not Cuman Humans, Animals, and other living creatures mahkuk that have a family, but Cloud was also have family.Here are 4 Families cloud:1. High clouds (Family A)High
clouds form between 10,000 and 25,000 feet (3,000 and 8,000 m) in the
polar regions, 16,500 and 40,000 feet (5,000 and 12,000 m) in temperate
regions, and 20,000 and 60,000 feet (6,000 and 18,000 m) in the tropics.
[2]The clouds in the Family A includes:• Genus Cirrus (Ci): putihberserat clouds of fine ice crystals visible in the blue sky. In general, non-convective except castellanus and floccus species.o Species fibratus Cirrus (Ci fi): Fibrous cirrus with no tufts or hooks.o Species uncinus Cirrus (Ci UNC): Hooked cirrus filaments.o
Types of Network Topology And Disadvantages and KelebihanyaA computer network is built using a network topology. Not all network topologies suitable for use in a computer network. It was influenced of the resources will be used to build the network. Therefore, a network administrator must be careful in selecting a suitable topology for the network to be on him. In this post I review some of the common types of network topologies in use along with the advantages and disadvantages of each.
a. Bus Topology
Bus
topology is often also referred to as the backbone topology, where
there is a coaxial cable that stretched then a few computers connected
to the cable.
Bus topology advantages:• Layout simple cable so installation is relatively easy• Damage to the client computer will not affect the communication between other clients• Save wired so installation cost is relatively cheaper• Addition and subtraction terminal can be done without interrupting the operation running.Disadvantages bus topology:• If the main cable (bus) or backbone is broken then the communication fails• If the main cable is very long then the search becomes difficult disorder•
The possibility of collision data (data collisions) when many clients
who send a message and it will reduce the speed of communication.• Data security is not guaranteed• Required repeater for long distance
b. Topology Ring
Ring topology is called because of its shape like a circle cincing. All computers in the network will be connected in a ring. The
ring is almost the same function as the topology concenrator star at
the center of the gathering of the lead from any computer connected.
Pros ring topology:• Can serve traffic flow data solid• Data streams flow faster because it can serve data from the left or the server kanandari• Trasmisi relatively simple data packets traveling in one direction only.Disadvantages ring topology:• Damage to any of the media sender / terminal work to paralyze the entire network• Package the data must pass through every computer between the sender and the receiver, making it slower•
Development of a network becomes more rigid due to the addition of the
terminal or node becomes more difficult when the port sudahhabis.
c. Star Topology
Star
topology is called because of its shape like a star, a device called a
concentrator can be a hub or switch to the center, where all the
computers in the network is connected to the concentrator.
Advantages star topology:• Because each component is connected directly to the central node management made easy• Failure of communication easily traced.• Failure in one component / terminal does not affect the other terminal communication.• centralized control to facilitate the detection and fault isolation, and easy network management.Disadvantages star topology:• Failure to control center (central node) cut off all communication•
When used as a control center is the hub then the speed will be reduced
in accordance with the addition of a computer, the more the slower.• wasteful in the use of cable•
HUB conditions should remain in good condition, HUB damage resulting
paralysis of all links in the network so that the computer can not
communicate with each other.
d. Topology Tree
Tree topology is a generalization of development or bus topology. Transmission medium is a branching cable loop is not closed yet.
Tree topology advantages:• Allows for a network of point-to-point• Overcoming limitations in a star topology, which has limited the connection point hub.• Topology tree divides the entire network into more manageable parts• This tree topology has the advantage over able to reach greater distances to activate repeater owned by HUB.Disadvantages tree topology:• Since branching then needed a way to show where the data is sent, or to whom the transmission of data intended.• Need a mechanism to regulate the transmission of terminals in a network terminal.• The cables used to be a lot more so it requires careful planning in its settings, including the layout of the room.• HUB becomes a critical element.
e. Mesh Topology
Mesh topology is a topology that does not have a rule in the connection. Due
to the irregular communication failures becomes difficult to detect,
and it is possible wasteful in the use of the transmission medium. each device every prrangkat connect directly to other devices on the network. As a result, the mesh topology each device can communicate directly with the target device (dedicated links).
Excess mesh topology:• Able to communicate directly with the destination device.• Data can be sent directly to the destination computer without having to go through another computer faster. One link in particular used to communicate with computers on the go.•
Have a Robust properties, ie the event of disruption in the connection
of computer A with computer B because of damage to the cable connections
(links) between A and B, the disorder does not affect the connection of
computer A to another computer.• Easy to process identification problems in the event of damage to connections between computers.Disadvantages mesh topology:• Each device must have an I / O port. It took a lot of wires so it took a lot of cost.• Installation and configuration more difficult for computers to each other should be connected directly.• The cost of a large excess untukmemelihara relationship
